How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Appendix
Appendix
Glossary
Introduction
Index
Contents
219
How to Load
Documents
Scanner
Overview
TOP
6 Gently close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover [fi-7700/fi-
7700S]" (page 25).
HINT
Remove the document pad if the ADF lock screws are difficult
to remove.
If you remove the document pad, attach the document pad in
the following procedure:
1 Place the document pad against the upper left corner on the
document bed.
Make sure the velcro fasteners are in the correct direction
and the groove is in the correct place on the document pad.
2 Close the document cover slowly.
When you close the document cover, the document pad is
attached to the document cover.
Groove
Velcro Fasteners
Document Pad
Velcro Fasteners
To Next Page
Loading...
