Introduction
Glossary
Appendix
Glossary
Index
Contents
TOP
227
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Job Separator
A sheet to insert between documents in a batch for separating different jobs.
The following types of job separators are available:
Job separator with patch codes:
A sheet with patch codes printed.
Job separator with barcodes:
A sheet with barcodes printed.
Job separator for hardware (job separation sheet):
A special sheet with a notch of 20 × 15 mm (length × width) located in the top middle.
Legal size
A standard paper size used in the United States and other countries (8.5 × 14 in.).
Landscape
Orientation in which the short side of the document is set parallel to the feed direction.
Letter size
A standard paper size used in the United States and other countries (8.5 × 11 in.).
Moiré patterns
Recurrent patterns on scanned images caused by incorrect settings of angles.
Multi Image
A function which outputs the image in both color/grayscale and black & white at once.
Multifeed
Multifeed is an error when two or more sheets are fed through the ADF at once. When a different document length is
detected, this detected result is also called a multifeed.
Noise removal
A function which improves the quality of an image by removing isolated noise that appear as black dots in a white area (or
vice versa).
To Next Page
Loading...
