Index
Contents
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
43
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
4 Load the documents in the ADF paper chute (feeder) so
that the narrowest document can be picked by the pick
rollers.
Load the documents face-down in the ADF paper chute (feeder).
ATTENTION
Remove all paper clips and staples.
Reduce the number of sheets if a multifeed or pick error occurs.
ATTENTION
Make sure that all documents are placed underneath the pick
roller. Otherwise, some documents may be skewed or not fed
into the ADF.
Width of the Pick
Roller
Good
Bad
Width of the Pick
Roller
To Next Page
Loading...
