Index
Contents
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
45
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
HINT
The procedure to unlock the side guides and change the position
of the side guides so that you can place documents in the center of
the ADF chute (feeder) is as follows:
1 Slide the side guide lock of the side guide that is locked in the
direction of the arrow.
2 Hold both side guides while pressing the side guide buttons
on them and move them all the way to the center.
When you move the side guides while pressing the side
guide buttons on them, the left and right side guides move
in conjunction with each other, which allows you to place
documents in the center of the ADF paper chute (feeder).
Side Guide
Buttons
Side Guides
To Next Page
Loading...
