2 - 10 C156-E097-01EN
Table 2.4 SCSI function specifications (3 of 7)
×: Supported
–: Not supported
Item Specification
MODIFY DATA POINTER X’01’ to ’00’ –
SYNCHRONUS DATA TRANSFER REQUEST X’01’ to ’01’
×
EXTENDED IDENTIFY X’01’ to ’02’ –
WIDE DATA TRANSFER REQUEST X’01’ to ’03’ –
TEST UNIT READY X’00’
×
REZERO UNIT X’01’
×
REQUEST SENSE X’03’
×
FORM UNIT X’04’
×
FmtData(Format Data) =0
×
Interleave factor
×(Non-interleaved)
Defect list by block address =0
×
Defect list by block address
≠0
–
Defect list by byte length from Index =0 –
Defect list by byte length from Index
≠0
–
Defect list by physical sector address =0 –
Defect list by physical sector address
≠0
–
CmpLst (complete list) –
FOV (format options valid)
×
DPRY (disable primary) –
DCRT (disable certification)
×
STPF (stop format) –
IP (initialize pattern)
×
DSP (disable saving pattern) –
Immed (immediate) –
Command
(group 0)
Extended
message
To Next Page
Loading...
