Fujitsu Primergy RX200 S4 - Page 15

RX200 S4 Operating manual 15
Preface Features
Server management
Server management is implemented using the ServerView software supplied
combined with PDA (Prefailure Detection and Analysis) technology from Fujitsu
Siemens Computers. PDA reports the threat of a system error or overload at an
early stage, allowing preventive measures to be taken.
ServerView enables the management of all PRIMERGY servers in the network
via a central console. The following key functions and others are supported by
ServerView:
● Round-the-clock monitoring, regardless of server status
● High-performance, graphical console bypass (AVR) protected by
HTTPS/SSL (128 bit)
● Remote storage via USB
● Remote power on (Wake On LAN)
● Automatic switch-off when the housing is opened (housing monitoring)
● Temperature monitoring of the CPU and the surrounding area
● Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
in the event of failure of memory modules or processors
● Power monitoring
● End-of-life monitoring of fans with prompt notification before failure
● Watchdog timer for operating system monitoring and application monitoring
with ASR&R
Further information on the ServerView server management is provided in the
associated documentation.
ServerStart
You can configure the PRIMERGY server quickly and precisely with the
ServerStart software provided. User-guided menus are available for installing
the server operating system (for further details see section “Configuring the
server” on page 69).