70 Operating manual RX200 S4
Configuring the server Startup and operation
5.3.3 Configuring the PCI SAS controller with RAID
functionality
The server has an PCI SAS controller with RAID functionality. You can configure
the PCI SAS controller either before or during ServerStart. Using ServerStart is
recommended.
I A separate utility is available to the controller for MegaRAID configu-
ration. More detailed information may be found in the “MegaRAID Config-
uration Software User’s Guide” (on the ServerBooks DVD under
“Controllers”).
I Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
To Next Page
Loading...
Need help?
General