Fujitsu Primergy RX200 S4 - Configuration Without Serverstart

72 Operating manual RX200 S4
Configuring the server Startup and operation
5.3.5 Configuration without ServerStart
Configuring the onboard SATA controller
Configure the controller as described in section “Configuring the onboard SATA
controller” on page 69.
Configuring the PCI SAS controller with “Integrated Mirroring Enhanced”
Configure the controller as described in section “Configuring the PCI SAS
controller with “Integrated Mirroring Enhanced”” on page 69.
Configuring the PCI SAS controller with RAID functionality
Configure the controller as described in section “Configuring the PCI SAS
controller with RAID functionality” on page 70.
Installing the operation system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.