42 Operating manual RX200 S4
Installing/removing the server in/from the rack Hardware installation
The main features of the rack systems from Fujitsu Siemens Computers are as
follows:
PRIMECENTER Rack
– Telescopic rails screwed to the front.
The rails have a linear alignment feature to ensure that they can be adjusted
to different rack depths.
– Enhanced cable management in the lateral rack area.
DataCenter Rack
– Telescopic rails screwed to the front (except in the rear left area, where a
support bracket is used).
– Enhanced cable management in the lateral rack area.
The mounting of the rails in the different racks is described in the next sections.
Installation of the cable management is described in detail in the Technical
Manual for the respective rack.
For rack systems from other manufacturers:
To Next Page
Loading...
