RX200 S4 Operating manual 59
Startup and operation Controls and indicators
Hard disk activity indicator (green)
Flashes green when an internal hard disk drive is being accessed.
CSS CSS/Global Error indicator (yellow/orange)
Does not light up when the system is OK. No service incident or
critical event has occurred.
If the event is still acute after a power failure, the indicator is
activated after the restart.
CSS
Flashes yellow if an error occurred that you can fix yourself with the
CSS concept (see “Customer Self Service (CSS)” on page 10). For
more details on the error, you can consult the ServerView Local
Service Panel or ServerView S2.
Lights up yellow if a prefailure event was detected for a CSS
component. Details of the event can be found in the System Event
Log or using ServerView S2. The indicator also lights up in standby
mode.
Global Error
Flashes orange when a critical event has occurred. Details of the
event can be found in the BIOS Setup, in the System Event Log or
using ServerView S2. The indicator also flashes in standby mode.
Lights up orange if a prefailure event was detected for a non-CSS
component. Details of the event can be found in the System Event
Log or using ServerView S2. The indicator also lights up in standby
mode.
!
To Next Page
Loading...
