RX200 S4 Service Supplement 23
Replacement routines Replacing the fan board
Figure 9: Removing the fan cage
Ê Loosen the two screws (see the circles) and remove the fan cage.
Figure 10: Removing the fan board
Ê Loosen the seven screws (see the circles) and remove the fan board.
Ê Insert the new fan board and fasten it with seven screws.
Ê Reinsert the fan cage and fasten it with two screws (see figure 9).
Ê Reinsert the system fans (description see the Operating Manual).
Ê Connect all cables to the fan board (see the cabling plan in the Options
Guide).
To Next Page
Loading...
