PRIMERGY RX200 S4 User's Guide

Areas Covered

Before Reading This Manual

This section explains the notes for your safety and conventions used in this manual.

Chapter 1

Overview

This chapter explains component names and basic operations of this server, as well as an

overview of the software provided with this server. In addition, the workflow, from placing the

server to starting the operation, is also described.

Chapter 2

Checking before OS Installation

This chapter explains the preparation on the server and cautions necessary before OS

installation. Please read this chapter before starting installation.

Chapter 3

OS Installation

This chapter explains how to install the OS in the server using ServerStart.

Chapter 4

Operations after OS Installation

This chapter explains the operations to be performed after OS installation. Be sure to perform

those operations before operating the server.

Chapter 5

High Reliability Tools

For stable PRIMERGY server operations, we recommend that high reliability tools be installed.

This chapter explains the installation and necessary settings of high reliability tools.

Chapter 6

Installing Internal Options

This chapter explains how to install internal options.

Chapter 7

Configuring Hardware and Utilities

This chapter explains how to make the environment settings necessary to operate the server and

how to use each utility.

Chapter 8

Operation and Maintenance

This chapter explains the operations that become necessary after starting to use this server as

well as daily care and maintenance.

Appendix

This appendix explains the specifications for the server and for its internal options.

Fujitsu Primergy RX200 S4 - Page 30

Other manuals for Fujitsu Primergy RX200 S4