RX200 S4 Service Supplement 29
Replacement routines Replacing the system board
Ê Reinstall the memory modules in their slots (description see the Options
Guide).
Ê Reinsert the air duct. Make sure that the hooks of the air duct engage in the
fan cage.
Ê Close the server and plug in the power plugs (detailed description see the
Options Guide).
Ê Connect all external cables.
V CAUTION!
To ensure correct operation, make sure you do the following after
installing the new system board:
– Update the iRMC S2 firmware and the BIOS
– Set the BIOS default values
– Set the customer-specific settings
I If the customer owns a license key for Advanced Video Redirection and
Remote Storage (iRMC2 Advanced Pack), the license key has to be
loaded onto the iRMC S2 via the iRMC S2 web interface (description see
manual „PRIMERGY ServerView Suite iRMC S2 - integrated Remote
Management Controller“) after replacing the system board.
To Next Page
Loading...
