How to Perform a Scan (for Mac OS users)
267
6. Press the [Scan/Stop] button on the ScanSnap to finish scanning.
D The application specified for the selected profile starts up.
z You can also finish scanning by clicking the [Finish Scanning] button in the [ScanSnap
Manager - Image scanning and file saving] window.
z The [Scan/Stop] button on the ScanSnap flashes in blue throughout the scan.
z To select an application to link with ScanSnap Manager in the Quick Menu after
scanning is completed, refer to "Using the Quick Menu" (page 260).
z When the [Set the marked text as a keyword for the PDF file] checkbox or the [Convert
to Searchable PDF] checkbox is selected in the [File option] tab, the application starts
after text recognition has been performed on the scanned image.
A window showing the text recognition progress appears during text recognition
process.
z By default, documents are scanned with the following settings: [Image quality:
Automatic resolution] and [Color mode: Auto color detection].
For details about how to change scan settings, refer to "How to Configure Scan
Settings" (page 273).
z The application that starts up after scanning varies depending on what is selected in the
[Application] tab in the ScanSnap setup window. For details, refer to the ScanSnap
Manager Help.
z The output image may slightly differ from the original document in size.
z When one of the below applications is active (application menu appears in the menu
bar), scanning documents by pressing the [Scan/Stop] button on the ScanSnap
automatically starts the linkage between ScanSnap Manager and the application.
- Cardiris (links with ScanSnap Manager only when the document is of business card
size)
- Scan to Mobile
For details about automatic linkage, refer to "Automatic Linkage with Applications"
(page 286).
To Next Page