Actions (for Mac OS users)
310
Without using the Quick Menu
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu"
(page 256).
D The ScanSnap setup window appears.
2. From the [Application] pop-up menu in the [Application] tab, select [Scan
to Print].
To disable the Quick Menu, you need to clear the [Use Quick Menu] checkbox in the ScanSnap
setup window.
For details about how to perform scanning without using the Quick Menu, refer to "Without Using
the Quick Menu" (page 265).
ScanSnap Manager can also link with [Scan to Print] when you select:
z [Scan to Print] from the [Profile] pop-up menu of the ScanSnap setup window
z [Scan to Print] from the Profile menu
To Next Page
Loading...
