Fujitsu ScanSnap S500

154
Turn on the scanner before cleaning the following locations, and clean the following rollers
while rotating them.
• Feed rollers (2 pieces)
Clean lightly taking care not to roughen the surface of the rollers. Take particular care in
cleaning the feed rollers since black debris on the rollers adversely affect the pickup perfor-
mance.
• Eject rollers (2 pieces)
Clean lightly taking care not to roughen the surface of the rollers.
Take particular care in cleaning the eject rollers since black debris on the rollers adversely
affect the pickup performance.
To rotate the feed rollers and the eject rollers, press the [POWER] button while holding
down the [SCAN] button.
As a guideline, six presses of the [POWER] button make the rollers to rotate one full turn.
ATTENTION
Connect the AC adapter and AC cable only when cleaning the feed rollers and
eject rollers.
1. Hold down the [SCAN] button.
2. Press the [POWER] button
while holding down the [SCAN]
button.
⇒ The rollers rotate.