24
3. Open the paper chute of ScanSnap.
⇒ ScanSnap is automatically turned on and detected by your personal computer.
4. ScanSnap is added as new hardware.
How to add hardware varies with the OS running on your computer.
■ For Windows 98
The "Insert Disk" dialog box is displayed.
Insert the Windows 98 CD into the CD drive, and then click the [OK] button.
■ For Windows Me
New hardware is automatically added, and processing continues.
■ For Windows 2000
The "Digital Signature Not Found" dialog box is displayed. Click the [Yes] button.
If the scanner is not automatically turned on, push the [POWER] button on the
scanner.
To Next Page
Loading...
