Fujitsu ScanSnap S500 User Manual

2.2 Connecting ScanSnap to your PC
ScanSnap S500 Operator's Guide 25
Connecting ScanSnap
2
■ For Windows XP
1) When the "Found New Hardware Wizard" dialog box is displayed, select "No, not
this time" and then click the [Next] button.
2) Click the [Next] button in the following window.
ATTENTION
The above windows may not appear unless Windows XP Service Pack 2 is
installed.
ATTENTION
Although the message "If your hardware came with an installation CD or floppy
disk, insert it now." is displayed, you do not need to insert the CD into the CD-
ROM drive.

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g