Fujitsu ScanSnap S500 User Manual

3.4 Changing Scan Settings
ScanSnap S500 Operator's Guide 73
Basic Scanner Operations
3
<When changing the settings>
1) In the "Add or Remove Custom sizes" window, select the document size to be
changed and click the [Change] button.
2) Change the settings in the "Additional custom size settings" womdow.
3) To complete the setting, click the [OK] button.
4) The screen returns to the "Add or Remove Custom sizes" window and the changes
are saved. Click the [Close] button to exit the "Add or Remove Custom sizes" win-
dow.
■ "Scan mixed paper size"
By marking the checkbox, you can scan the documents of different widths or sizes at a
time.
■ [Carrier Sheet Settings] button
You can set or change settings to scan with the carrier sheet.
ATTENTION
When you select Business card (90 mm x 55, 55 mm x 90 mm) and scan:
From the scanned length, the horizontal or vertical position is automatically rec-
ognized and scanned.
For length (loading direction), it is the actual scanned length of the card.
For width, it is fixed at 90 mm (horizontal position), or 55 mm (vertical
position).
ATTENTION
For information about how to set the Carrier Sheet Settings, refer to "3.6
Changing Carrier Sheet Settings" (page 86).

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g