Fujitsu ScanSnap S500 User Manual

3.5 Saving Scan Settings
ScanSnap S500 Operator's Guide 81
Basic Scanner Operations
3
4. After changing the configurations on the selected profile, click the [OK] button.
⇒ A file overwrite confirmation message appears.
5. To overwrite the configurations select the [Yes] button. To save the configurations on
the "Standard" profile click the [No] button.
Clicking the [Cancel] button will return you to the "Scan and Save Settings" window.
(When you change the configuration of the "Standard" profile, the confirmation message
will not appear.)
HINT
If you select another profile from the "Setting when left-clicked" drop-down list
before clicking the [OK] button, the following message will appear.
Clicking the [Yes] button will change the configurations on the current profile,
and switch to another profile.
Clicking the [No] button will cancel the changes for the current profile and
switch to another profile.
Clicking the [Cancel] button will return you to the "Scan and Save Settings" win-
dow.

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g