32
1. The way that you select an action after scanning in the menu.
<Quick Menu Mode>
HINT
You can switch between the above two modes by checking and unchecking
[Use ScanSnap Quick Menu] in the Right-Click Menu, which pops up when the
ScanSnap Manager icon ( ) on the task bar is right-clicked. For details, refer
to "Use Quick Menu" (page 65).
1) Press the [SCAN] button to scan the
document.
2) The ScanSnap Quick Menu appears after
scanning.
3) Select a desirable action in the ScanSnap
Quick Menu.
⇒ An application starts up for you to
perform the selected action.
HINT
The Quick Menu Mode has the following features:
• You can perform a desirable action with point and click operations by using the
menu simple enough for beginners.
• This way of scanning is suitable when you want to perform various actions
after scanning. You do not have to specify an application in advance.
S
S
To Next Page
Loading...
