Why won't my Fujitsu Tablet PC start after I switch it on?
If your Fujitsu Tablet PC does not start after being switched on, check whether the battery is correctly installed in its compartment. If it is installed correctly, the battery may be dead, so charge the battery, insert a charged battery, or connect the mains adapter to the Tablet PC. Also, verify that the power adapter is correctly connected to the Tablet PC.
What to do if the external monitor remains blank with my Fujitsu Tablet?
If the external monitor remains blank, first, ensure it is switched on. If it is on but still blank, you may have activated power saving mode; try pressing a key or tapping the touchscreen. Also, check the brightness settings on the monitor and adjust them if necessary. Verify the graphics driver settings or check for external monitor detection in the "Intel Graphics Media Accelerator Driver for mobile". Finally, switch off both the Tablet PC and the external monitor and check the power and data cable connections, ensuring they are properly connected before switching them back on.
General| Operating System | Windows 7 Professional |
|---|---|
| RAM | 2 GB |
| Bluetooth | Bluetooth 2.1 + EDR |
| Battery Life | up to 8 hours |
| Processor | Intel Atom Z670 |
| Display | 10.1 inches, 1280 x 800 pixels |
| Graphics | Intel Graphics Media Accelerator |
| Wireless | 802.11b/g/n |
| Camera | 1.3 MP front camera |
| Ports | USB 2.0 |
| Security | TPM 1.2 |
To Next Page
