Why is pen input not working on my Fujitsu STYLISTIC Q665?
If pen input is not working on your Fujitsu Tablet, the incorrect driver may be installed. If your device can only be operated using the pen, install the driver for the standard model. If your device can be operated using the pen and by finger, install the driver for the "Dual Digitizer" model.
What causes the external monitor to be blank or have an unstable image on my Fujitsu Tablet?
If the external monitor is blank or the image is unstable when connected to your Fujitsu Tablet, it could be due to the wrong external monitor being selected or the wrong screen resolution being set for the application program. Terminate the application program in Windows. If the issue persists, use the key combination for switching the screen output to switch to the touchscreen of the tablet PC. Adjust the screen resolution and select the correct monitor (1 or 2) as described in your operating system's documentation.
Why does the battery discharge too quickly on my Fujitsu STYLISTIC Q665 Tablet?
If the battery on your Fujitsu Tablet discharges too quickly, it could be due to several reasons. The battery might be too hot or too cold, in which case the battery indicator will flash; bring the Tablet PC to a normal temperature. If the battery life is extremely short, the battery is likely old and needs replacement. Also, an application running might be consuming a lot of power by frequently accessing the hard disk or optical drive; use the mains adapter as much as possible. Finally, the screen brightness might be set to maximum; reduce the brightness via Control Panel – Hardware and Sounds – Windows Mobility Center to lower energy consumption.
How to correct the date or time on a Fujitsu STYLISTIC Q665 Tablet PC?
To correct the date or time on your Fujitsu Tablet PC, you can set the date and time in the Main menu using the BIOS-Setup-Utility. Alternatively, contact your sales outlet or the hotline/service desk.
What to do if the battery indicator does not illuminate on Fujitsu STYLISTIC Q665 Tablet?
If the battery indicator does not illuminate on your Fujitsu Tablet, the battery is likely discharged. Charge the battery or connect the Tablet PC to a power outlet using the AC adapter.
How to resolve 'Failure Fixed Disk n' error on Fujitsu STYLISTIC Q665?
If you encounter a 'Failure Fixed Disk n' error on your Fujitsu Tablet, the settings of the hard disk drive are incorrect. Start the BIOS Setup (Primary Master submenu) and select the correct settings.
What to do if Fujitsu STYLISTIC Q665 Tablet PC does not start after switching on?
If your Fujitsu Tablet PC doesn't start, the battery might be dead; charge it or connect the AC adapter. Alternatively, the AC adapter might not be properly connected; check the connection to the Tablet PC and then switch the Tablet PC on.
What to do if my Fujitsu STYLISTIC Q665 Tablet PC does not start?
If your Fujitsu Tablet PC does not start after being switched on, ensure that the battery isn't dead by charging it or connecting the AC adapter. Also, check if the AC adapter is properly connected to the Tablet PC. Finally, ensure that the Tablet PC is switched on.
What to do if my Fujitsu STYLISTIC Q665 Tablet stops working?
If your Fujitsu Tablet PC stops working, it might be in energy-saving mode. Try ending the energy-saving mode. If that doesn't work, an application program may have caused the malfunction. Close the application or restart the Tablet PC by restarting the operating system or switching it off and back on. Also, check if the battery is dead and charge it or connect the AC adapter.
Why is the battery charging indicator not illuminating on my Fujitsu STYLISTIC Q665?
If the battery charging indicator on your Fujitsu Tablet does not illuminate, it's likely that the battery is not charging. To fix this, connect the Tablet PC to a mains outlet using the mains adapter. Please note that the battery will only start charging if its capacity is below 90%.
Essential safety information to be followed when operating the Tablet PC.
Specific safety precautions for devices with integrated wireless components.
Guidance on safely transporting and cleaning the device.
Steps for unpacking and inspecting the Tablet PC for any damage.
Instructions on how to properly connect the AC adapter for power.
Procedure for switching on the Tablet PC for the first time.
Explains the meaning of various status lights on the Tablet PC.
Detailed steps for powering the Tablet PC on and off.
How to interact with the device using the touchscreen.
Explains touch gestures for interacting with the device using fingers.
Guide on using the stylus for navigation, input, and drawing.
Guidelines for charging and maintaining the device's battery.
Information on switching wireless components on/off and configuring WLAN.
Steps to configure supervisor and user passwords in BIOS for enhanced security.
How to activate and deactivate password protection for the hard disk drive.
Instructions for enabling and disabling the TPM security chip.
How to connect external displays via Micro HDMI and VGA ports.
Steps for connecting and safely removing USB devices.
Procedure to enter and start the BIOS Setup Utility.
How to navigate and interact within the BIOS Setup Utility interface.
Methods for resetting the device when it becomes unresponsive.
To Next Page
General