Fujitsu STYLISTIC Q665

Questions and Answers:

J
Jeremy EvansAug 25, 2025
What to do if my Fujitsu STYLISTIC Q665 Tablet PC stops working?
- J
  Jeffrey GregoryAug 25, 2025
  If your Fujitsu Tablet PC stops working, it might be in energy-saving mode. To solve this, simply exit energy-saving mode. Alternatively, an application program may have caused the malfunction. Try closing the application or restarting the Tablet PC by either restarting the operating system or switching the device off and back on again. If the battery is dead, charge it or connect the mains adapter.
P
pamela23Aug 25, 2025
Why is the battery charging indicator not illuminating on my Fujitsu STYLISTIC Q665?
- D
  Daniel PerryAug 26, 2025
  If the battery charging indicator on your Fujitsu Tablet does not illuminate, it's likely that the battery is not charging. To fix this, connect the Tablet PC to a mains outlet using the mains adapter. Please note that the battery will only start charging if its capacity is below 90%.
L
Linda ShermanAug 26, 2025
What to do if my Fujitsu STYLISTIC Q665 Tablet stops working?
- J
  Jeffrey Barrett IIIAug 26, 2025
  If your Fujitsu Tablet PC stops working, it might be in energy-saving mode. Try ending the energy-saving mode. If that doesn't work, an application program may have caused the malfunction. Close the application or restart the Tablet PC by restarting the operating system or switching it off and back on. Also, check if the battery is dead and charge it or connect the AC adapter.
E
Emily BryantAug 26, 2025
What to do if my Fujitsu STYLISTIC Q665 Tablet PC does not start?
- K
  Kimberly HillAug 27, 2025
  If your Fujitsu Tablet PC does not start after being switched on, ensure that the battery isn't dead by charging it or connecting the AC adapter. Also, check if the AC adapter is properly connected to the Tablet PC. Finally, ensure that the Tablet PC is switched on.
J
jason21Aug 27, 2025
What to do if Fujitsu STYLISTIC Q665 Tablet PC does not start after switching on?
- D
  David CollinsAug 27, 2025
  If your Fujitsu Tablet PC doesn't start, the battery might be dead; charge it or connect the AC adapter. Alternatively, the AC adapter might not be properly connected; check the connection to the Tablet PC and then switch the Tablet PC on.
H
Heather Wells PhDAug 27, 2025
How to fix a blank external monitor connected to my Fujitsu STYLISTIC Q665 Tablet?
- V
  Victoria MccormickAug 27, 2025
  If the external monitor remains blank, ensure the monitor is switched on. Power saving mode may have been activated, so press a key on an external keyboard or tap the touchscreen. The brightness might be set too low, so adjust the brightness. Also, check the graphics driver settings or whether an external monitor has been detected in 'Intel Graphics Media Accelerator Driver for mobile'. Finally, ensure the AC and data cables are properly connected to both the Tablet PC and the monitor, then switch both devices on.
R
Richard FerrellAug 27, 2025
How to fix a dark touchscreen on a Fujitsu STYLISTIC Q665 Tablet PC?
- N
  Nicholas BrooksAug 27, 2025
  If your Fujitsu Tablet PC's touchscreen remains dark, first, ensure the touchscreen is not switched off by pressing a key (if you have an external keyboard) or tapping the touchscreen. If you have an external monitor or television connected, check whether the graphics driver settings are correct or whether an external monitor has been detected in 'Intel Graphics Media Accelerator Driver for mobile'.
J
John WilliamsAug 28, 2025
What to do if the external monitor remains blank when connected to my Fujitsu STYLISTIC Q665?
- R
  Robert RamseyAug 28, 2025
  If the external monitor connected to your Fujitsu Tablet remains blank, first ensure that the monitor is switched on. If power saving has been activated, press a key (external keyboard) or tap on the touchscreen. Also, check if the brightness is set too low and adjust it accordingly. Verify that the screen output is correctly set, and check the graphics driver settings or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". Finally, ensure the power and data cables are properly connected by switching off both the Tablet PC and the external monitor, checking the cable connections, and then switching them back on.
S
samantha60Aug 28, 2025
Why does the battery discharge too quickly on my Fujitsu STYLISTIC Q665 Tablet?
- M
  michael03Aug 28, 2025
  If the battery on your Fujitsu Tablet discharges too quickly, it could be due to several reasons. The battery might be too hot or too cold, in which case the battery indicator will flash; bring the Tablet PC to a normal temperature. If the battery life is extremely short, the battery is likely old and needs replacement. Also, an application running might be consuming a lot of power by frequently accessing the hard disk or optical drive; use the mains adapter as much as possible. Finally, the screen brightness might be set to maximum; reduce the brightness via Control Panel – Hardware and Sounds – Windows Mobility Center to lower energy consumption.
J
Jacob WhiteAug 29, 2025
What causes the external monitor to be blank or have an unstable image on my Fujitsu Tablet?
- A
  Andrea BaileyAug 29, 2025
  If the external monitor is blank or the image is unstable when connected to your Fujitsu Tablet, it could be due to the wrong external monitor being selected or the wrong screen resolution being set for the application program. Terminate the application program in Windows. If the issue persists, use the key combination for switching the screen output to switch to the touchscreen of the tablet PC. Adjust the screen resolution and select the correct monitor (1 or 2) as described in your operating system's documentation.