What does 'System CMOS checksum bad - default configuration used' mean on my Fujitsu Tablet?
If you encounter the error message "System CMOS checksum bad - default configuration used" on your Fujitsu Tablet, the system configuration information is incorrect. To resolve this, switch off the Tablet PC, then switch it back on. In the BIOS Setup, select the Exit menu, choose "Load Setup Defaults", select OK, and press Enter.
What does 'Failure Fixed Disk' mean on my Fujitsu STYLISTIC Q665?
If you encounter the error message "Failure Fixed Disk" on your Fujitsu Tablet, the settings of the hard disk drive are incorrect. Start the BIOS Setup (Primary Master submenu) and select the correct settings.
What to do if there is a keyboard error on my Fujitsu Tablet?
If you are using an external keyboard with your Fujitsu Tablet and encounter a keyboard error, check the connection and reboot the Tablet PC.
What does 'Press to resume, to SETUP' mean on my Fujitsu Tablet?
If you see the message "Press to resume, to SETUP" on your Fujitsu Tablet, it indicates an error during the self-test before the operating system starts. Press the Alt key on the Tablet PC to boot the operating system.
What does keyboard controller error mean on my Fujitsu Tablet?
If your Fujitsu Tablet displays the error message "Keyboard controller error", switch off your Tablet PC with the ON/OFF switch. Wait 3 - 5 seconds and switch on the Tablet PC again.
What to do if the operating system is not found on my Fujitsu STYLISTIC Q665?
If you encounter the error message "Operating system not found" on your Fujitsu Tablet, check in the BIOS Setup whether your hard disk has been set correctly and ensure that the operating system is installed on the corresponding drive.
What does 'Stuck key' mean on my Fujitsu Tablet?
If you see the message "Stuck key" on your Fujitsu Tablet, make sure that no key is pressed.
What does error message CMOS battery bad mean on Fujitsu Tablet?
If the error message "CMOS battery bad" appears repeatedly on your Fujitsu Tablet, the buffer battery in the Tablet PC is flat. Contact your sales outlet or our customer service centre.
Essential safety information to be followed when operating the Tablet PC.
Specific safety precautions for devices with integrated wireless components.
Guidance on safely transporting and cleaning the device.
Steps for unpacking and inspecting the Tablet PC for any damage.
Instructions on how to properly connect the AC adapter for power.
Procedure for switching on the Tablet PC for the first time.
Explains the meaning of various status lights on the Tablet PC.
Detailed steps for powering the Tablet PC on and off.
How to interact with the device using the touchscreen.
Explains touch gestures for interacting with the device using fingers.
Guide on using the stylus for navigation, input, and drawing.
Guidelines for charging and maintaining the device's battery.
Information on switching wireless components on/off and configuring WLAN.
Steps to configure supervisor and user passwords in BIOS for enhanced security.
How to activate and deactivate password protection for the hard disk drive.
Instructions for enabling and disabling the TPM security chip.
How to connect external displays via Micro HDMI and VGA ports.
Steps for connecting and safely removing USB devices.
Procedure to enter and start the BIOS Setup Utility.
How to navigate and interact within the BIOS Setup Utility interface.
Methods for resetting the device when it becomes unresponsive.
To Next Page
General