Working with the notebook
Switching on the notebook via the port replicator
► Press the ON/
OFF button on the port replicator to switch the notebook on.
You can c onfi
gure the function of the ON/OFF switch under Windows ( see "
Programming
the ON/OFF
button" , Page 22). The settings apply both to the ON/OFF switch of
the notebo
ok and to the ON/OFF switch of the Port Replicator.
Switchin
g off the notebook via the Port Replicator
► Close all applications an d s hut down your op erating system (please refer
to th e manual for the operating system).
If the notebook cannot be shut down prope rly, press the ON/O F F switch on the notebook
for about four seconds. The notebook will switch itself off. Any data not saved m ay be lost.
Disconnecting the notebook from the Port Replicator
► Disc
onnect the supplied USB cable (USB Type-C) from the USB 3.2 Gen
2po
rt (USB Type-C) of the notebook.
56 Fujitsu
To Next Page
Loading...
