Fujitsu U9310X User Manual

Tro ubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "
Setting the pen", Page 32 and
"
Calibrat ing the pen", Page 32.
Pen input not working
Cause
Troubleshooting
The pen is in p ower-saving mode. ► Press the pen button gently to wake the pen
from sleep mode.
The pen battery is com pletely discharged.
► Insert the pen fully into its slot on the
notebook to charge the pen battery.
The notebook cannot be started
Notebook
Cause Troubleshooting
The batte ry is dead.
► Connect the notebook to the mains voltage
via the mains adapter and charge the
battery.
The power adapter is not connected correctly.
► Check whether
the mains adapter is
connected co r
rectly to the notebook.
► Switch the notebook on.
The notebook stops working
NotebookEnergysavingmode
Cause Troubleshooting
Notebook is in energy saving mode. ► Leave energy saving mode.
An application programme has caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The batte ry is dead.
► Connec
t the notebook to the mains voltage
via the
mains adapter and charge the
batte
ry.
Fujitsu 83

Fujitsu U9310X Specifications

General

Brand	Fujitsu
Model	U9310X
Category	Laptop
Language	English