Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is sw
itched
on and read y for operation (ref
er to th e
documentation supplied with t
he printer).
The printer is not connected c
orrectly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The wireless connec
tiontoanetworkdoesnotwork
Thewireless conne
ctiontoan etworkdoes notwork
Cause Troubleshooting
The wireless compo
nent is disabled.
► Switch the wireless component on (see
"
Switch ing th e wireless components on and
off", Page 50).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
► Check whether the wireless connection is
switched on via the software.
► Further information on using the wireless
component can be found in the help files.
The battery d
ischarges too quickly
Battery:
Cause
Troubleshooting
The battery
is either too hot or too cold. In this
case the bat
tery indicator flashes.
► Move the not
ebook so that its temperature
returns to w
ithin the normal range.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. I f necessary, have the batt ery replaced
by an authorised service provider.
You may have an application running th at
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
► Use the mains adapter as frequently as
possible.
The maximum brightness may have been set
for the screen.
► Set the screen slightly darker with the
key combination for Decreasing the sc reen
brightness in order to reduce the amount of
power being d rawn.
84 Fujitsu
To Next Page
Loading...
Need help?
General