Settings in BIOS Setup Utility
The com plete deletion p rocess can be recorded as an audit-compliant log
and copied to an external USB stick, which must be fo rmatted as FAT32.
Please connect only one external USB stick.
► Select whether a status report should be written to the USB s tick.
The user can select the following tasks which should be run by the
system after the deletion process:
• Reset administrator and user password
• Load BIOS se tup defaults
• Shutdown the Computer
• Exit Erase Disk with no a d ditio n al options upon completion
► Select the function which you require.
The deletion process starts.
78 Fujitsu
To Next Page
Loading...
Need help?
General