63
6. TIMER SETTING
METHOD
10min
10min 10min
Previous day’s
WEEKLY setting
Next day’s
WEEKLY setting
WEEKLY OFF time
WEEKLY ON time
Available range
0.00 0.00
10min
Notes • A flashing time value indicates that the system is in time-setting mode.
• You do not need to set values for both WEEKLY1 and WEEKLY2. If you wish, you can set values only for
WEEKLY1 or only for WEEKLY2.
• The allowable range for the day’s time setting is shown below.
• If the set OFF time goes into the subsequent day, the [ ] caption appears on the display.
To Next Page
Loading...
