Fujitsu UTY-DMMYM User Manual

En-21
3
“Hour” is highlighted. Set the “Hour” with the [Cursor
button (Up/Down)].
Mo 10:00AM
Schedule 1
Day
Time
End
Room 1
2 – – : – – AM – – –
3 – – : – – AM – – –
4 – – : – – AM – – –
Enable
Schedule 2
Mo Tu We Th Fr
1 6 00 AM – – –
Cancel: OK :
When “Hour” is set, move to “Minute” by pressing the
[Cursor button (Right)].
4
“Minute” is highlighted. Set the “Minute” with the [Cursor
button (Up/Down)]. (Setting can be completed quickly if
the button is pressed continuously.)
Mo 10:00AM
Schedule 1
Day
Time
End
Room 1
Cancel: OK :
2 – – : – – AM – – –
3 – – : – – AM – – –
4 – – : – – AM – – –
Enable
Schedule 2
Mo Tu We Th Fr
1 6 00 AM – – –
If the time is set for 24 hours indication, move to “On/
Off” by pressing the [Cursor button (Right)].
If the time is set for AM/PM indication, move to “AM/
PM” by pressing the [Cursor button (Right)].
Set “AM” or “PM” with the [Cursor button (Up/Down)].
Mo 10:00AM
Schedule 1
Day
Cancel: OK :
Time
End
Room 1
2 – – : – – AM – – –
3 – – : – – AM – – –
4 – – : – – AM – – –
Enable
Schedule 2
Mo Tu We Th Fr
1 6:00 AM – – –
When “AM/PM” is set, move to “On/Off” by pressing the
[Cursor button (Right)].
Notice
Display of time is the same style as the setting. Refer to
[9. SUBMENU SETTING].
5
“On/Off” is highlighted. Set “On” or “Off” with the [Cursor
button (Up/Down)].
Mo 10:00AM
Schedule 1
Cancel: OK :
Day
Time
End
Room 1
2 – – : – – AM – – –
3 – – : – – AM – – –
4 – – : – – AM – – –
Enable
Schedule 2
Mo Tu We Th Fr
1 6:00 AM On – – –
When “On” is set, move to “Operation mode” by press-
ing the [Cursor button (Right)].
When “Off” is set, it is not required to set the “Operation
mode” and “Temperature” setting. (It cannot be set.)
6
“Operation mode” is highlighted. Set the “Operation
mode” with the [Cursor button (Up/Down)].
Mo 10:00AM
Schedule 1
Cancel: OK :
Day
Time
End
Room 1
2 – – : – – AM – – –
3 – – : – – AM – – –
4 – –
: – – AM – – –
Enable
Schedule 2
Mo Tu We Th Fr
1 6:00 AM On Cool – –
°C
When “Operation mode” is set, move to “Temperature”
with the [Cursor button (Right)].
Notice
Operation mode is set to Cool, Dry, Heat, Auto. The
possible simultaneous operation combinations are re-
stricted. Refer to [6-3-2. Operation mode setting].
7
“Temperature” is highlighted. Set “Temperature” with
the [Cursor button (Up/Down)].
Mo 10:00AM
Schedule 1
Cancel: OK :
Day
Time
End
Room 1
2 – – : – – AM – – –
3 – –
: – – AM – – –
4 – –
: – – AM – – –
Enable
Schedule 2
Mo Tu We Th Fr
1 6:00 AM On Cool 28
°C
Notice
Possible temperature setting ranges are as follows:
·
Cool, Dry, Auto ................. 18 to 30 °C (64 to 88 °F)
·
Heat ................................. 16 to 30 °C (60 to 88 °F)
9380221012-03_OM_en.indd 219380221012-03_OM_en.indd 21 30/11/2553 15:25:0330/11/2553 15:25:03

Fujitsu UTY-DMMYM Specifications

General

Brand	Fujitsu
Model	UTY-DMMYM
Category	Remote Control
Language	English