3. ARP OPERATION
3-11
[ARP•AIS]
1 BACK
2 GUARD ZONE STAB
STAB HDG/STAB NORTH
3 GUARD POLYGON
OFF/STAB GND/
STAB HDG/STAB NORTH
4 [TRIAL MANEUVER]
5 [ARP SYMBOL]
6 [AIS SYMBOL]
7 [FUSION]
8 AIS FUNCTION
OFF/ON
9 AIS LOST ALARM
ACTIVATED TARGET/
ALL TARGET/
RANGE
0nm
[ARP SYMBOL]
1 BACK
2 ARP SYMBOL COLOR
RED/GRN/BLU/YEL/
CYA/MAG/WHT
3 ARP SYMBOL SIZE
SMALL/STD/LARGE
4 PAST POSN COLOR
RED/GRN/BLU/YEL/
CYA/MAG/WHT
5 PAST POSN POINTS
5/10
3.7.4 ARP symbol color and size
You may choose the color and size of the ARP symbol as follows:
1. Roll the trackball to choose the MENU box at the right side of the screen and
then push the left button.
2. Roll the wheel to choose 4 ARP•AIS and then push the wheel or the left
button.
ARP•AIS menu
3. Roll the wheel to choose 5 [ARP SYMBOL] and then push the wheel or the
left button.
ARP SYMBOL menu
4. Roll the wheel to choose 2 ARP SYMBOL COLOR and then push the wheel.
5. Roll the wheel to choose color desired and then push the wheel.
6. Roll the wheel to choose 3 ARP SYMBOL SIZE and then push the wheel.
7. Roll the wheel to choose SMALL, STD(Standard) or LARGE as appropriate
and then push the wheel .
8. Push the right button three times to close the menu.
To Next Page
Loading...
