Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 User Manual

5. VIDEO PLOTTER OPERATION
5-34
Waypoint mark (B, C and W types only)
The waypoint mark shows the location of a destination waypoint which is set on
a navigator. You may mark this location on the radar display by following the
procedure shown below.
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
Waypoint Mark
Waypoint mark
1. Roll the trackball to choose the MENU box and then push the left button.
2. Roll the wheel to choose 8 [NAV LINE•WPT] and then push the wheel or the
left button.
3. Roll the wheel to choose 2 NAV LINE DATA and then push the wheel or the
left button.
4. Roll the wheel to choose WPT MARK and then push the wheel or the left
button.
5. Push the right button twice to close the menu.

Furuno FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7 Specifications

General

Brand	Furuno
Model	FAR21x7 & BB FAR28x7 Operator's Manual BB FAR28x7
Category	Marine Radar
Language	English