Furuno FCV-600 - 1.26.4 [Data] Menu

1. OPERATION
1-54
1.26.4 [Data] menu
This menu mainly sets up how to display data input by external equipment.
Menu Item Description
[Go to WPT] See section 1.23.
[WPT List]
[Delete All WPT]
[Data Box1] Show or hide the Data Box1, Data Box2 indication, which appears below the
header info. You can select multiple indications (SOG, STW, position, heading,
volt, water temperature, heave). Requires appropriate data.
[Data Box2]
[Bearing] Select the format of bearing display, [True] or [Mag](netic).
[Wind Spd/Dir] Select the format of wind speed and direction output from a wind sensor, [True]
or [Apparent].
Data Box1 display
Data Box2 display