Furuno FCV-600 - Page 89

APPX. 1 MENU TREE
AP-4
2
Transducer
Type*¹
,
#
(CW, CHIRP)
XDR1*²
,
#
(CW, CHIRP, Off)
CW Type
#
(------, 520-5PSD, 520-5MSD, 520-PLD, 525-5PWD,525T-PWD, 525T-BSD,
525STID-MSD, 525STID-PWD, 525T-LTD/12, 525T-LTD/20, SS60-SLTD/12,
SS60-SLTD/20, 600W, 50/200-1T*², 526TID-HDD*², 1kW*²)
CHIRP Type
#
(------, B150M*¹, TM150M*¹, B75M*¹, SS75M*¹, B785M*¹, B75H*¹, SS75H*¹,
TM165HW*¹, B75L, SS75L, B175L*², B265LH*², B265LM*², B275LHW*²,
TM265LH*², TM265LM*², TM275LHW*², CM265LH*², CM265LM*², CM275LHW*²)
XDR2*²
,
#
(Off, On)
CHIRP Type*²
,
*³
,
#
(------, B150M, TM150M, B75M, SS75M, B785M, B75H, SS75H, TM165HW,
B175M, TM185M, B285M, B175H, B175HW, TM185HW, B285HW, B265LH,
B265LM, B275LHW, TM265LH, TM265LM, TM275LHW, CM265LH,
CM265LM, CM275LHW)
External KP*²
,
#
(Off, On)
Service
Serial
#
Format (Off, Echo, Tankenmaru)
Pic. Sync*⁴ (Yes, No)
Sub Clutter*⁴ (0-15, 4)
Start Depth*⁵ (0-2400 m)
Period*⁵ (1-99 sec)
Resolution*⁵ (0.1-99.9 m, Auto)
Data Type*⁵ (Peak, Average)
Demonstrate
#
(Off, Demo1, Demo2, Demo3)
Diagnostic Test
LCD Test
Wireless LAN Test
Menu Setting Export (Yes, No)
Menu Setting Import (Yes, No)
Update (Yes, No)
Factory Default Settings (Yes, No)
*¹: Only for FCV-600.
*²: Only for FCV-800.
*³: The displayed menuitems differ
depending on the [XDR1] settings.
*⁴: Only available when [Tankenmaru] is
selected in the [Format] menu.
*⁵: Only available when [Echo] is selected
from the [Format] menu.
#
: Grayed-out on the sub-monitor side.