172 •
••
• Raster Chart material
How to select active group
You can select a group as an active group. To select, proceed as followed:
1. Press CHART PLAN push button. Select Catalogue from the menu.
2. Press Groups... button in an ARCS Catalog dialog box. A Chart group
dialog box appears.
3. Select desired group from Edit group list box.
4. In Active Group -field press Set button. The name of active group appears
to Active Group -field.
How to delete a group
You can remove a defined group from a hard disk. To remove proceed as followed:
1. Press CHART PLAN push button. Select Catalogue from the menu.
2. Press Groups button in an ARCS Catalog dialog box. A Chart group dialog box appears.
3. Select desired group from Edit group list box.
4. Press Remove button. Confirm deleting a group, press OK.
To Next Page
Loading...
