Raster Chart material •
••
• 173
How to remove ARCS chart from the system
You can remove ARCS charts from the system either Manual or by Active group.
Manual remove of charts
1. From the Control panel press CHART PLAN pushbutton.
2. From menu check that there is a following text in first line: Activate S57
chart. If it is, then go to step 4.
3. If there is text Activate ARCS chart choose this command.
4. Select Remove from the menu and manual from the sub menu. There will
appear a chart list dialog.
5. Select desired charts to remove them from the system.
6. Press OK button. System will remove charts from the hard disk.
Remove charts using Active group
1. From the Control panel press CHART PLAN pushbutton.
2. From menu check that there is a following text in first line: Activate S57
chart. If it is, then go to step 4.
3. If there is text Activate ARCS chart choose this command.
4. Select Remove from the menu and by Active Group from the sub menu.
There will appear an ARCS Remove dialog box.
Press OK button, the system will remove ARCS charts from hard disk
which are involved in Active group.
To Next Page
Loading...
