Manual Updates •
••
• 199
Insert a new chart object using Copy
You can make new object by copying existing one. Then you pick up a object and make a copy of it with all related
properties. After copying you can modify position and properties of copied object suitable for your purposes.
1.
2. Move cursor over
desired object and
press SELECT
3.
4.
5.
7. Set position
with with
cursor
and press SELECT
6.
8.
1. Press Copy button in a Manual Update Planning
2. Move cursor over desired object and press SELECT push button in Control Panel.
3. Select object in Object by Cell window. There could be more than one objects in the area.
4. Press Accept
5. New object is displayed in a List of Manual Update Planning window. Then press Edit Position and Properties.
6. Press Edit Position
7. Move cursor over desired location on ECDIS screen. And press SELECT pushbutton.
8. Press directly Accept Manual Updates as Permanent.
To Next Page
Loading...
