Furuno TZT14 - How to Display the Point Information for the Active Route; How to Restart and Cancel Navigation to a Point; How to Restart Navigation to a Point; How to Cancel Navigation to a Point

4. POINTS
4-14
4.10.4 How to display the point information for the active route
1. Select the yellow line to display the pop-up menu.
2. Select [Rte Detail]. The [Route Detail] window appears.
3. Select [Close] to close the route detail list.
4.11 How to Restart and Cancel Navigation to a Point
4.11.1 How to restart navigation to a point
When you go to a point, you can restart
the navigation to the point from the cur-
rent location.
When you steer to keep away from an
obstruction or the ship drifts, you go off
course as shown in Line 1 in the figure.
If you do not need to return to the origi-
nal course, you can go to the point from
the current position as shown in Line 2 in
the figure.
1. Select the red dashed line or the yellow line of the route to display the pop-up
menu.
2. Select [Restart Nav.]. The route start position for the route moves to the current
position.
4.11.2 How to cancel navigation to a point
1. Select the go to point, red dashed line or the yellow line of the route, to display the
pop-up menu.
2. Select [Stop Nav.].
The red dashed line, yellow line, XTE lines and arrival area circle are erased from the
screen.
CTS: Course To Steer, TTG: Time To Go
Line 2
Line 1
Obstacle
Original course