Furuno TZT14 - 8 File Operations; How to Format SD Cards; Files Menu Operation

8-1
8. FILE OPERATIONS
This chapter covers the file operations shown below, using SD cards.
• How to export points, routes and tracks
• How to import points, routes and tracks
Note: DO NOT remove the card while the SD drive is being accessed, to prevent loss
of data or damage to the card.
8.1 How to Format SD Cards
You do not need to format SD cards for use with the system. However, if you need to
format a card to delete all data from the card, see section 1.6 "SD Cards".
8.2 Files Menu Operation
The [Files] menu of the main
menu is where you import
and export data.
TZD
Export File Format
Import/Export
Import
Import Points & Routes
Export All Points & Routes
Import Tracks
Export Tracks
Export
Export
Import
Backup/Restore Settings
BackUp Settings
Restore Settings
Restore
Backup
Clone SD-Card
Clean Points, Routes & Tracks
Clean all
Clone
NN3D Import/Export
Import from NN3D
Export to NN3D
Export
Import