Furuno TZT14 - How to Copy the Equipment Settings; How to Delete Points, Routes and Tracks

8. FILE OPERATIONS
8-6
8.9 How to Copy the Equipment Settings
You can copy the data between SD cards.
1. Put the source SD card in the left card drive and the copy destination SD card in
the right card drive.
2. Select [Menu] on the menu icon bar to open the main menu.
3. Select [Files].
4. Select [Clone SD-Card].
5. Select [Start Clone].
6. After the equipment has copied the data, select [Close] to exit the menu.
8.10 How to Delete Points, Routes and Tracks
You can delete all points, routes and tracks currently stored in a TZT unit.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Files].
3. Select [Clean Points, Routes & Tracks].
4. Select [Yes].
5. After the equipment has deleted the data, select [Close] to exit the menu.
Clone SD-Card
SD Card Left
Ready
SD Card Right
Ready
You must insert All SD-Cards
Cancel
Start Clone
Are you sure you want to delete all points, routes & tracks? Important : all Navnet
TZT have to be connected for this operation.
Yes
No