Furuno TZT14 - How to Adjust the Image Size

9. CAMERA/VIDEO/FUSION-Link
9-4
FLIR camera
Images from an infrared camera allow you to navigate easily at night or in bad weath-
er. Select [Camera] - [FLIR Installation] of the main menu.
[Scan IP]: Select the [Scan] icon to scan the IP address automatically when connect-
ing the FLIR camera.
[FLIR IP]: Enter the IP address manually with the software keyboard then select [Con-
firm].
[Video Source]: Select the input source for the FLIR.
[Camera Offset (Right-left)]: Adjust the side position of the FLIR camera.
[Camera Offset (Up-Down)]: Adjust the up-and down position of the FLIR camera.
[Automatic Zoom]: Select the [ON] icon to turn on the automatic zoom.
[Zoom Distance]: Set the distance to zoom automatically.
[Camera Altitude]: Set the altitude for the FLIR camera.
[Automatic Lock On Active Waypoint]: Select the [ON] icon to automatically track the
point currently set as a go to point.
[Automatic Lock ON MOB]: Select the [ON] icon to automatically track the MOB posi-
tion.
9.3.3 How to adjust the image size
You can adjust the image size.
1. Select [Menu] on the menu icon bar to open the main menu.
FLIR Installation
Scan IP
VIdeo Source
FLIR IP
255.255.255.255
Camera Offset (Right-left)
Camera Offset (Up-Down)
Automatic Zoom
Zoom Distance
Camera Altitude
Automatic Lock On Active Waypoint
Automatic Lock On MOB
Scan
NickName Camera 1
+0.0 º
+0.0 º
300 ft
300 ft