Furuno TZT14 - Track Thickness; How to Delete Tracks

2. CHART PLOTTER
2-18
On the screen
1. Select a track to display the pop-up menu.
2. Select [Color].
3. Select a color.
2.11.4 Track thickness
You can set the thickness of the track. If you are following the same track many times,
you can show the track in the thinnest width to prevent overlapping of track.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Ship & Track].
3. Drag the circle icon in [Track Thickness] to set the level.
4. Select [Close] to exit the menu.
2.11.5 How to delete tracks
If the screen becomes full of track, you can not know which is the newer track. Delete
the track you do not need.
How to delete the selected history track
You can delete the selected history track. You can not delete the track currently re-
corded.
1. Select the track to delete. The pop-up menu appears.
2. Select [Delete].
How to delete all tracks
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Ship & Track].
3. Select [Delete] in [Delete All Tracks].
The confirmation message appears.
4. Select [Yes].
5. Select [Close] to exit the menu.
Yes No
Are you sure you want to delete all tracks? Important : all Navnet TZT have to be
connected for this operation.