Furuno TZT14 - Page 216

13. HOW TO ADJUST SETTINGS
13-5
Menu items available in the sounder mode
Menu items available in the camera mode
Control label
Function Base Full
Level 1 Level 2
Frequency HF Activate HF display. Yes Yes
LF Activate LF display. Yes Yes
Mode Single Freq. Activate single frequency display. Yes Yes
Dual Freq. Activate dual frequency display. Yes Yes
Btm Lock Activate bottom lock display. Yes Yes
Btm Zoom Activate bottom zoom display. Yes Yes
Adjust Auto Fishing Activate automatic fishing mode. Yes Yes
Auto Cruising Activate automatic cruising mode. Yes Yes
Manual Activate manual mode. Yes Yes
HF Gain Adjust the gain for high frequency in-
dividually in manual mode.
Yes Yes
LF Gain Adjust the gain for low frequency indi-
vidually in manual mode.
Yes Yes
Auto Range - Activate or deactivate auto range. Yes Yes
A-scope - Show or hide A-scope display. Yes Yes
Fish Alarm - Activate or deactivate fish alarm. No Yes
Accu Fish -
Activate or deactivate ACCU-FISH
TM
.
Yes Yes
Bottom Type (BBDS1
and DFF1-UHD)
- Show or hide bottom discrimination
display.
Yes Yes
Event - Put an event mark. No Yes
Display
(TZT9/TZT14 only)
NavData Open the data boxes. No Yes
Menu Open the main menu. No Yes
Lists Open the lists. No Yes
Tide Open the tide graph. No Yes
Control label
Function Base Full
Level 1 Level 2
Analog 1* - Display the image from analog 1. Yes Yes
Analog 2* - Display the image from analog 2. Yes Yes
IP 1* - Display the image from IP camera 1. Yes Yes
IP 2* - Display the image from IP camera 2. Yes Yes
IP 3* - Display the image from IP camera 3. Yes Yes
IP 4* - Display the image from IP camera 4. Yes Yes
Quad - Display the four images from axis server 241Q. Yes Yes
Input 1* - Display the image for input 1 from axis server
241Q.
Yes Yes
Input 2* - Display the image for input 2 from axis server
241Q.
Yes Yes
Input 3* - Display the image for input 3 from axis server
241Q.
Yes Yes
Input 4* - Display the image for input 4 from axis server
241Q.
Yes Yes
Quad 2 - Display the four images from second axis serv-
er 241Q.
Yes Yes
Input 1* - Display the image for input 1 from second axis
server 241Q.
Yes Yes