2. CHART PLOTTER
2-20
• The XTE lines appear when you turn on these lines.
When you are following a route, you can do the following from the pop-up menu. Se-
lect the yellow line to display the pop-up menu.
• [Stop Nav.]: Stop following the route.
• [Restart Nav.]: Restart following the route.
• [Skip Wpt]: Skip a waypoint.
• [Rte Detail]: Open the [Route Detail] list.
• [Edit]: Open the [Editing Route] window.
• [Lists]: Open the lists.
• [Extend]: Extend a route from the last point on the route.
For additional information, see the chapter 5.
Track
Activate
[Track Back]
First go
to point
Route
point
Yellow line: Shortest
course from the current
position to the go to point
Arrows point in
direction to follow route
0
1
2
3
Point where the
track back starts
Thick red dashed line:
Course between first go to
point and the point where
the [Track Back] function
starts
XTE lines
To Next Page
Loading...
