Furuno TZT14 - Page 76

2. CHART PLOTTER
2-25
[Depth Shading Transparency]: Set the degree of transparency for the depth shading
on the water. See paragraph 3.2.1.
[Radar Overlay]
[Radar Overlay Transparency]: Set the degree of transparency for the radar echo.
[Radar Overlay Source]: Select the source for the radar echo from [Antenna Range1]
or [Antenna Range2].
[Radar Overlay Range link]: Activate or deactivate matching the overlay with radar
ranges.
[Echo Color for Overlay]: Select the color for the radar echo.
For the following menu items in the table, see chapter 3.
[Reset Default Settings]: Select this menu item to restore default settings for the [Plot-
ter Display] menu.
Menu item Reference
[3D Display]
• [Auto 3D Alti Exaggeration]
• [3D Alti Exaggeration]
• [Auto 3D Bathy Exaggeration]
• [3D Bathy Exaggeration]
See paragraph 3.1.3.
[Depth Shading Values]
• [Auto Depth Shading Color Scale]
• [Minimum Value]
• [Maximum Value]
• [Depth Color Shade]
See paragraph 3.2.1.