Gaggia Anima - General Technical Specifications

GAGGIA ANIMA 02 TECHNICAL SPECIFICATIONS
Pag. 1/5
2.1. Technical specifi cations
Power supply and output: 240 V~ 50 Hz 1850 W - 230 V~ 50/60 Hz 1850 W
120 V~ 60 Hz 1500 W
Temperature monitoring: (NTC) variable resistor sensor - transmits the value to the
electronic card
Safety system:
2 thermostats at 190°C one shot
Coffee heat exchanger output:
Stainless steel
(230 V~) 1900 W - (120 V~) 1300 W - (100 V~) 1100 W
for coffee, hot water and steam dispensing
Gear motor: 2 rotation directions; power supply 24VC
Pump: Ulka Type EP5/S GW approx. 13-15 bar with reciprocating
piston and thermal switch 100°C 48 W, 230V, 50 Hz, 120V,
60Hz 100V, 50/60 Hz
Overpressure valve: Opening at approx. 16-18 bar
Water fi lter: In tank
Coffee grinder: Direct current motor with fl at ceramic grinder blades
Automatic dosage: Dose adjustment controlled by the electronic system
Power consumption: During heating phase- approx. 5.6 A
Dimensions: W x H x D in mm:
221 x 340 x 430 mm (
Anima OTC AMF CMF)
(data may vary depending on the model)
221 x 386 x 430 mm (Anima XL)
Weight:
7.5kg (
Anima OTC AMF CMF)
(data may vary depending on the model)
8kg (
Anima XL)
Water tank capacity: 1.8 l. (Anima OTC AMF CMF) 2.5 l. (Anima XL)
Coffee bean hopper capacity: 250 g. (Anima OTC AMF CMF) 500 g. (Anima XL)
Dreg drawer capacity: 15
Water circuit fi lling time: Approx. 15 sec Max. on fi rst fi lling cycle
Heating time: Approx. 45 sec.
Grinding time: Approx. 8-10 sec.