EasyManua.ls Logo

Gaggia Anima - Machine Parameters and Performance

Gaggia Anima
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GAGGIA ANIMA 02 TECHNICAL SPECIFICATIONS
Pag. 5/5
2.3. Machine parameters and performance
PRODUCT
QUANTITY
Default quantity
(Grams)
User
programmable
Programm. by
Production /
Service
Espresso 40 +/- 10gr Yes No
Espresso lungo 120 +/- 14% Yes No
Hot water Continues until the water supply has been exhausted (capacitive sensor)
Steam
pannarello
(frother)
time-out 03 minutes.
WATER TANK Description
Water reserve (pulses) with water lter 200
Water reserve (pulses) with no water lter 200
Water reserve modi able by Production/Service
departments
No
"Fill tank" alarm Yes
"No tray" alarm Yes (Fill tank)
Water mains No
DREG DRAWER Description and values
Time-out for dreg drawer
5 sec.
Reset dreg counter
Dreg emptying alarm, if the dreg drawer is
removed for more than 5 seconds.
STANDBY Description and values
Inlet time (default) 15 minutes
Inlet time programmed by Production/Serv-
ice
Yes
Boiler temperature during Standby Boiler OFF
Descaling frequency
Hardness Water hardness Without anti-scale lter With anti-scale lter
1 Soft (up to 7°dH) 240 litres (480,000 pulses) 480 litres (960,000 pulses)
2 Medium (7° - 14°dH) 120 litres (240,000 pulses) 240 litres (480,000 pulses)
3 Hard (15° - 21°dH) 60 litres (120,000 pulses) 120 litres (240,000 pulses)
4 Very hard
(over 21°dH)
30 litres (60,000 pulses) 60 litres (120,000 pulses)
The default water hardness level is 3. Each litre of water corresponds to approximately 2,000 pulses

Related product manuals