Gaggia Anima - Coffee Grinder Adjustment

GAGGIA ANIMA 07 DISASSEMBLY
Pag. 4/9
For a standard adjustment, both markings must be
aligned.
7.5. Coffee grinder adjustment
The grinding adjustment can be set by the user (only with the coffee grinder in operation) by
pressing and turning (only by one click at a time) the insert inside the coffee bean hopper with
the aid of the wrench supplied.
Adjustment by a service center
To adjust grinding further, the engineer can work directly on the coffee grinder by pressing and turning
the ring nut (C) shown. (clockwise + to increase the particle size of the coffee and anticlockwise - to
decrease it).
If there are any remains of coffee powder between the two grinding blades it is recommended to
tighten by max. two marks at a time.
Lastly, move the arrow (A) on the adjustment knob to the center of the adjustment dots on the
cover (B).
B
A
+
-
C
+
-