64 ● CF DMC-40x0 Command Reference
CF
FUNCTION: Configure
DESCRIPTION:
Sets the default port for unsolicited messages. By default, the DMC-40x0 will send unsolicited
responses to the main RS-232 serial port. The CF command allows the user to send
unsolicited responses to the Main or Aux Serial Port, or Handles A-H.
ARGUMENTS: CF n where
n is A thru H for Ethernet handles 1 thru 8, S for Main serial port, T for Aux serial port or I is to
set to the port that issues the CF command.
USAGE:
While Moving Yes Default Value S
In a Program Yes Default Format -----
Command Line Yes
Controller Usage
ALL CONTROLLERS
OPERAND USAGE:
_CF contains the decimal value of the ASCII letter.
RELATED COMMANDS:
CW Configures MSB of unsolicited messages
WH What Handle
TH Tell Handles
To Next Page
Loading...
